Level Welding Creep Feeder

Level Welding 250 bu. Creep Feeder

• 12,000 lb Axle is guaranteed for transport when feeder is full
• New Highway rated 10 Ply Radials (Not Blems) on sixteen inch rims
• Replaceable 7,000 lb Screw Jack on 9 inch jack pad
• Salt & Mineral attachment with Rubber Tubs
• Full length Lid
• Lid Locks
• Lid Handle that allows opening from the ground
• Full length Lid Deflector to prevent feed jamming in behind lid
• New Weatherproof Chutes open up to seven inches.
• Feeders clean out completely with New full width Vee bottom.
• Generously proportioned Feed Troughs are 5” deep by 16” wide by 10’ long
• Feed on one or both side
• Twenty inch Eaves for weather protection
• Full Length Ladders inside and out for easy access to the top and inside of the feeder
• Panels won’t block lid for filling
• Panels keep cows away from feed open, closed or any where in between.
• No pins to pull or put in
•  Simple to open and close
• Creep panel is a full NINE feet from the trough
• A total of SIXTEEN walk through stalls located in the front sides and back.
• Calves do not need to make a 180 degree turn to exit creep pen
• Panels remove easily from feeder for Self-Feeding

$8,495 plus tax